Pulverizer 25 Turn

Some vehicles require the motor to run in the reverse direction, if needed we can set the motor up specifically for this. It's important to have the correct rotation of your motor, especially if you are adding timing. A motor with the incorrect rotation that has timing added will run with negative timing and will likely fail.

For more information on determining the rotation required for your truck, please view:

https://www.teambrood.com/Rotation-Guide

https://www.teambrood.com/Motor-Direction-Guide

Timing allows you to adjust the powerband of a motor. Motors come standard with 0 degrees of timing to insure proper installation in all vehicles. You may add timing up to 36 degrees in most motors, though we would recommend no more than 12 degrees in most motors. Please refer to our timing guide to understand the effects of timing on a motor

To learn more on timing, please visit :

https://www.teambrood.com/Timing-Guide

Install motor leads on your motor to fit your build without worry of incorrectly soldering the leads to the motor.

Precision Matched Motors utilize inductance and resistance matched armatures, with precision matched magnets. Multiple parts are matched between the motors (commutator, springs, brush resistance, etc). They are then assembled and run through a series of tests on multiple dynos and specialized analyzers to insure they operate perfectly in sync with each other, providing equal power and operational characteristics.

One motor is setup in reverse for correct dual motor installation. Motors are laser engraved F(Forward) and R(Reverse) on the bottom for easy identification. 

For more information on Precision Matched Motors please visit:

https://www.teambrood.com/Matched-Pair-Guide